>> 模型介绍 | Model Introduction >>>>>>>>
| > 灵感来源 Source of Inspiration
最近换了一个叫温致的HNB，与IUO最大的区别就是多了一个能装滤芯的嘴。所以做了一个小盒子来装这些小滤芯。🤣
I recently switched to a HNB device called Wenzhi. The biggest difference from IUO is that it comes with an additional mouthpiece that can hold filter cartridges. That’s why I designed this small box to store these tiny filters.
| > 见仁见智 Multifaceted Perspectives
是否适用于其他场景，请根据模型规格自行判断。
Suitability for additional applications should be self-assessed based on the model specifications.
| > 模型规格 Model Specifications
详细规格请参阅下载页的打印配置说明。
For detailed specifications, refer to the print configuration description on the download page.

>> 切片设置 | Slice Settings >>>>>>>>
| > 仅供参考，按需调整 For reference only; Customize as needed
| 耗材 Filament：PLA
| 层高 Layer Height
> 层高 Layer height：0.2mm
> 首层层高 First layer height：0.2mm
| 墙壁和表面 Walls and surfaces
> 墙顺序 Walls printing order：外墙/内墙 Outer/Inner
| 墙 Walls
> 墙层数 Wall loops：2
| 填充 Infill
> 稀疏填充密度 Sparse infill density：15%
> 稀疏填充图案 Sparse infill pattern：网格 Grid
| 支撑 Support
> 开启支撑 Enable support：需要 Required
> 类型 Type：树状(自动) Tree(Auto)
> 阈值角度 Threshold Angle：25°
| 高级 Advanced
> 顶部Z距离 Top Z distance：0.16mm
> 顶部接触面层数 Top interface layers：4 层 layers
> 支撑/模型xy间距 Support/object xy distance：2mm
| 筏层 Raft：无 NONE
| 轮廓圈 Skirt
> 轮廓圈类型 Skirt type：组合 Combined
> 轮廓圈数 Skirt loops：1

>> 组装说明 | Assembly Instructions >>>>>>>>
即打即用，无需组装。
Print-Ready / Assembly-Free

>> 其他说明 | Additional Notes >>>>>>>>
1.模型使用 Blender 4.5.2 LTS制作。
The model was created using Blender 4.5.2 LTS.
2. 可根据协议 CC BY-NC-SA 4.0 自行修改为所需样式使用。
You are free to modify it to your desired style as needed under the CC BY-NC-SA 4.0 license.
3. 无论如何，遇见是缘分，适用是幸会。欢迎点赞或收藏，感谢关注和助力。
Regardless, it’s serendipity to meet, and a delight to be useful. Likes, favorites, follows, and support are all greatly appreciated!
4. 百因必有果，打印不好别找我。即便同一设备，在不同的打印速度、切片设置、线材类型以及所处环境潮湿度都会对成品的质量、品质、效果造成影响。
Every cause has its effect—please note that I assume no responsibility for printing failures. Even with the same equipment, factors like printing speed, slicing settings, filament type, and ambient humidity can all affect the quality and performance of the finished product.
5. 所有成品在日常使用中都存在风险，请定期检查成品耐久，及时对成品进行更新，以免造成不必要的损失。
Risks may arise in the daily use of all finished products. Please regularly check their durability and replace or upgrade them in a timely manner to avoid unnecessary losses.
6. 鉴于模型社区的开放、包容和共享性质，为了避免引起不必要的纠纷，本人仅对“作者”标识的打印配置阐释说明。
Given the open, inclusive, and sharing nature of the model community, to avoid unnecessary disputes, I only provide explanations for the print configurations marked with the "Author" label.
7. 本篇英文翻译出自于豆包AI。
This English translation is powered by DouBao AI.

>> 声明 | Statement >>>>>>>>
由于个人时间和精力有限，本人仅通过个人注册的平台和账号以及个人拥有的域名（PoweredBy.CN）发布模型相关信息。其他非个人注册、授权的平台和账号发布涉及到本人制作的模型图纸均和本人无关且无任何利益关联。本人在互联网上一直秉承着“自由分享，免费共享”的理念，对已公开发布的模型图纸不会以任何理由限制下载（包含但不限于收费制、会员制、积分制等限制），请注意甄别！
欢迎您通过下载、点赞、关注、收藏、助力的方式表达您对模型的认可和喜爱，同时也非常感谢您对模型的点评。
您若同意并遵循知识共享许可协议“CC BY-NC-SA 4.0”，本人欢迎您对模型图纸以及相关页面进行任何形式的站外分享，也非常赞同和认可您对模型进行升级改造后的再分享行为。
Due to limited personal time and energy, I only publish model-related information through personally registered platforms, accounts, and my own domain (PoweredBy.CN). Any content involving model designs created by me that is posted on non-personal or unauthorized platforms/accounts is unrelated to me and involves no financial or other beneficial ties.
I have always adhered to the philosophy of "free sharing and open access" online. For publicly released model designs, I will never impose restrictions on downloads (including but not limited to paid plans, memberships, point systems, etc.). Please verify the sources carefully. You are welcome to express your appreciation for my models through actions such as downloading, liking, following, favoriting, or supporting my work. I sincerely appreciate your feedback and critiques.
Should you agree to and abide by the Creative Commons "CC BY-NC-SA 4.0" License, I welcome you to share the model files (e.g., STL/OBJ) and relevant pages in any form outside the platform. I also highly approve of and endorse the re-sharing of the upgraded or revamped model.

滑盖小盒子 Sliding-Top Small Box

模型规格-1 | Model Specifications​-1

0.2mm layer, 2 walls, 15% infill

模型规格-1 | Model Specifications-1