Design Concept

I designed this print bed scraper to fit mix every type of printed scraper in one scraper with easily swappable ends. The 'Snap' 3in1 Scraper is crafted for multifunctional use, combining utility and convenience in one tool by combining a blunt scraper (Close impact on smaller prints to "Wack the print off the bed", a regular scraper "Everyday scraper function", and a long scraper (wider print beds and greater removal). This allows for a quick swap in the scraper instead of printing a new scraper and saves filament.

Usage

Best for removing ANY 3D printed parts off a printed

Printing Tips

Use a any infill percentage as it does not need to be structurally strong. You can use any material to print this. ALSO PRINT EVERYTHING WITH SUPPORTS (the main body is the only thing that needs tree supports, and the heads need regular supports to save filament and decrease print time.)

Assembly Instructions

The scraper heads are designed to slide into the main body smoothly and stay there unless removed by force. As you can see all you have to do is slide the scraper head in and it should stay until you try to remove it, which then it should just pop out.

"Snap" 3in1 Scraper

0.2mm layer, 2 walls, 15% infill