Go Bills!

Tired of messy glue ruining your multi-color prints? This SnapFit Buffalo Bills logo is engineered to lock together like high-end building blocks. At 6mm thick, it has a premium, heavy feel that looks great on a desk or mounted on a wall.

I designed this in OpenSCAD and stress-tested it on my K2 SE to ensure the "click" is just right. Whether you have a CFS or just want to swap rolls, this three-part kit is a fast, satisfying print for any member of the Bills Mafia.

Print Settings

- Nozzle: 0.4mm

- Layer Height: 0.2mm (Mandatory for the snap math!)

- Wall Generator: Arachne (Required to capture the thin white outlines)

- Compensation: 0.15mm Elephant Foot Compensation

- Infill: 15% Gyroid

Assembly

1. Place the White Base on a hard, flat table.

2. Align the Blue Buffalo and press down firmly with your thumb—you'll feel a satisfying "click" once it's seated.

3. Snap the Red Streak in last.

4. Let the parts cool completely before snapping! Warm plastic is soft and might not hold the tension as well.

SnapFit Buffalo Bills Logo

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill