Design Concept

The Spot Welder PegBoard Holder is remix of the gridfinity holder by Matzetas. It should be universal fit for most portable spot welders. As it fits the one linked below:

https://www.amazon.com/Macaron-Portable-11-15Pro-Replacement-Soldering/dp/B0CKDGJMRW

Purpose

I have a custom DIY made Pegboard for my work desk and the holes on the board have have non-uniform holes over the whole wall. While measuring I found that the closest I can get is some holes are separated 25mm apart from each other if measuring from the middle of the hole. I made a bunch of different holders for tools I have. All of the uploaded holders are made for holes that fit only boards that are at least 5.2mm in hole size and 25mm apart from each holes center.

Printing Tips

Best for strength is to print at least with PETG. Supports are required for the main body.

Assembly Instructions

Remove the supports and the pegboard can be mounted in the slots.

Attribution goes to Matzetas on Printables for the original design.

Spot Welder PegBoard Holder

0.2mm layer, 3 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

Original