This custom-designed corner bracket is made for the Tapo 246D and other similar cameras, giving you a 270° viewing angle when mounted on a 90° corner. The bracket consists of two main pieces plus the camera mount section, secured with 4–6 bolts (not included).

The vertical angle is adjustable thanks to a cogwheel-style locking system: once tightened with bolts, the teeth interlock to create an extra secure grip. Since this is intended for outdoor use, I recommend printing in PETG, ABS, or another weather-resistant material.

Print time: ~4 hours total (depending on settings)

Print style: 2 stages

Auto-alignment: The corner brackets self-level against a 90° wall corner. (There’s ~5° tolerance, but more than 10° off-center will stress the mount — better to reposition.)

Angle design: Brackets are set at 45°.

Because the Tapo’s original bracket already allows horizontal manual rotation, you can easily adjust your final angle once mounted.

Assembly Instructions:

Place the left and right brackets facing away from each other, with cog teeth pointing outward.

Insert them into the U-shaped camera mount bracket.

Align bolt holes and insert bolts on each cogwheel side.

Tighten loosely at first to mark mounting positions, then secure firmly once aligned.

Sturdy, practical, and weather-ready — perfect for extending your Tapo camera’s coverage.

Tapo On Corner bracket + Tilt for Tapo C264D Security Camera

0.2mm layer, 2 walls, 15% infill