Recommended 3D Print Settings – British Police Call Box Dice Tower

The following settings are recommended to achieve the best balance of detail, strength, and print reliability for this model.

Printer Type:

FDM / FFF 3D Printer

Material:

PLA recommended

(PLA+ or PETG also work well for additional durability)

Layer Height:

0.20 mm (standard quality)

Nozzle Size:

0.4 mm

Wall / Perimeter Count:

Top / Bottom Layers:

First layer 0.5

Infill:

10–15%

Grid or Gyroid pattern works well

Print Speed:

200–300 mm/s

Supports:

Tree support at 30 degree

Build Plate Adhesion:

Skirt or brim recommended for stability

Print Orientation:

Print upright with the base on the build plate to preserve detail and ensure proper alignment of the internal dice ramps.

Cooling:

Standard PLA cooling (100% fan after first few layers)

Estimated Print Time:

Approximately 24-28 hours depending on printer and settings.

Post Processing (Optional):

Filament used

CR-PLA Blue

CR-PLA Black

CR-PLA White

Dice Compatibility:

Designed for standard 16–22 mm tabletop dice

TARDIS Dice Tower