This The Cat (also low poly version) model is made by Stigern.

It is nice curved cat model. I have printed its stl file model on scale 60%. The Model required Normal support. I have added Normal Manual Snug support at overhang portion only. Model will perfectly comes Out at any size with this setting.

I have used the PLA Material.

Material Used: PLA+ Midnight Black.

Print Parameters:

1) Slicer Software : Creality Print 6.0

2) Printer: Ender3 KE.

3) Profile mode: Normal Quality (0.2mm) (seam position-Back) (Scarf joint-Counter) for smoother.

4) Infill: 11% (Gyroid Pattern).

4) Scale: 60%

5) Retraction: 2mm minimum.

6) Print Speed: 300mm/s.

7) Printing Temp: 220 c.

8) Bed Adhesion: Outer Brim (width 4mm).

9) Support: Normal Manual (Snug)-at Overhang Portion only.

Note: Before printing Make sure Bed is well adhered with glued for perfect first layer.

I didn't find any issue with print. Go ahead with KE.

Hope You like it..!! Thanks for Watching..!! Happy Printing.

The Cat (also low poly version)

0.2mm layer, 3 walls, 15% infill

0.2mm layer, 2 walls, 11% infill