Here are the recommended Print Settings for the Table Lamp parts to achieve the best results and functionality:

1. The Twisted Shade

The goal is to make the shade translucent and clean, without visible seams.

Mode: Vase Mode (also called Spiralize Outer Contour in Cura). This is crucial. It forces the printer to move in a continuous spiral, eliminating the Z-seam and creating a smooth surface.

Layer Height: 0.2mm.

Wall Line Count: 1 (Required for Vase Mode).

Infill: 0% (Essential for light to pass through).

Top Layers: 0 (To keep the top open).

Bottom Layers: 3-4 layers (For structural stability at the connection point).

Material: White PLA or Transparent PLA for the best glow.

2. The Base

The goal here is structural rigidity and the wooden aesthetic you requested.

Infill: 15% - 20% (Grid or Cubic pattern) to give the base weight and stability.

Wall Line Count: 3 walls (to make it sturdy).

Layer Height: 0.2mm.

Supports: Select "Touching Build plate" only if there are significant overhangs for the cable hole or socket mount. Otherwise, it may print without them.

Material:

Wood PLA: Contains actual wood fibers; it can be sanded and stained after printing for a realistic wood finish.

Brown/Matte PLA: A standard alternative if you just want the color without post-processing.

TREE TABLE LAMP

0.2mm layer, 2 walls, 15% infill