A super fun modular Chess-inspired strategy game where totems gain or lose power as you build them.

Assemble, evolve, and command customizable pieces in a unique tactical duel.

As you stack or rearrange their sacred heads, your totems shift between forms – pawn, bishop,

rook, knight or queen. Victory demands creativity, transformation, and clever manipulation of

your ever-changing army.

Can be printed in any printer, since there is an option of a divided board for smaller printers

Sizes pre-set:

board complete: 250x250mm

board divided = 04 pieces of 125x125mm

totem pieces: 25x25mm each

You can use your own chess board for this game, but remember to limit the area to 6x6

If you prefer, you can print more pieces and adapt to a 8x8 board (then its 16 bases and 16 heads each player)

You can print in any color you prefer, like black and white, for a traditional chess looking

But I'd suggest beige and green, for a more rustic-like look

Can be printed without any support, , but some pieces, depending on your printer, will require a small support on the eyebrows or things like this.

If I would print in PLA, this is the settings I'd use:

-Dynamic Quality: 0.16mm (minimal possible)

-Printing Temperature: 200 (220 for vsilk)

-Build Plate Temperature: 70

-Speed: 40 mm/s

-Build Plate Adhesion Type: Brim

But feel free to change and use the settings you prefer.

Didn't test it on a resin printer, or in ABS.

Other printers will use different settings, so follow what you are used to, just be aware that the higher the resolution, better the details.

Tribal Chess Game - Rules Included - Print and Play