V2 OUT NOW

Original model by @PracticeFili_2157914 at

https://www.**********.com/model/941396-the-ultimate-finger-catapult-easy-to-print-updated

Check original model for more information.

Remixed the model to make it even more ultimate and stronger, larger, more capable, and have ammo.

Full collection of files.

WARNINGS AND NOTES:

-If there are any supports on the bridge from the spring mechanism to the bucket, please remove them in the slicer using the support painting tool.

-You may want to resize the spherical ammo in the slicer to 1cm so that it fits in the newest iterations.

-My V1 print took about half an hour and used 8.72g of filament.

-Supports are annoying and take around 5 mins to remove, but are necessary.

-V2 needs a brim or bed adhesion support

-My V2 print took 33mins and used 9.58g of filament

-Please leave a comment for any questions or concerns

Print Settings (finger catapult ultimate remix.stl and V2):

Wall Loops/Perimeters: 1000

Layer Height: 0.12mm (smaller layer heights seem to do better with overhangs.)

Supports: Auto generated tree supports on build plate only.

Infill: 69%

Orientation: default, with the widest/tallest part of the handle touching the bed

Brim: on

Print Settings (ammo):

Wall Loops/Perimeters: 1000

Layer Height: 0.08mm (smaller layer heights provide better quality. If you don't care about that, set yours higher)

Supports: none, some may be wanted on the spherical ammo to make it look better, but not necessary.

Infill: 69%

Orientation: default, on its bottom face.

Ironing Settings:

Ironing is optional

Ironing Type: Topmost surface only

Ironing Spacing: 0.1mm

Ironing Speed: 15mm/s

Ironing flow: 8%

Leave a comment if you want anymore advice on print settings. I am quite active on this account so should respond soon.

Printed on Creality Ender 3 V3 Core XZ

The Real Ultimate Finger Toy Catapult Collection