Peg board with the major stars that make up Ursa Major, along with the connectors to connect-the-dots into the famous constellation's shape. You'll need to print 18 connectors, specifically:

5 - 8mm connectors
4 - 10mm connectors
3 - 12mm connectors
1 - 14mm connector
3 - 16mm connectors

1 - 18mm connector

1 - 22mm connector

It sure was nice of the ancient Greeks (?) to make the distances between the stars so uniform!

I've got two more made (Orion and Leo), need a little polish, will post them if there is interest. May also make others as time permits.

Design Concept

The Ursa Major Connect the Dots model is designed to resemble the famous constellation Ursa Major, bringing the beauty of the night sky into your home. This model captures the constellation with a glowing dot-to-dot pattern.

Purpose

This model can be used as an educational tool to teach about constellations or simply as a decorative piece in any astronomy lover's home.

Print Recommendations

Print with glow-in-the-dark filament to accentuate the constellation shape in the dark. Using a higher resolution setting can provide a smoother finish for the lines connecting the dots.

Assembly Instructions

Minimal assembly required. Ensure proper alignment of dots in the correct arrangement as indicated for the Ursa Major constellation.

Ursa Major Connect the Dots

0.2mm layer, 2 walls, 10% infill

0.2mm layer, 2 walls, 15% infill