Usopp Chibi Figure 🎯🔫

Bring the wit and bravery of the Straw Hats' sniper to your shelf with this Usopp Chibi Figure in low‑poly style and a seated pose. Perfect for One Piece fans and collectors who enjoy 3D printing and hand painting.

🎯 Iconic design: Long nose, shooter goggles, green bandana and his slingshot in a cute geometric look.

🎨 Great for hand painting: Designed to be printed in one or a few colors and then painted with acrylics (olive green, brown, beige, yellow and skin tones).

🧑‍🎨 Fully customizable: Recreate the classic anime palette or try more realistic/military variants.

🎁 Perfect gift: Ideal for One Piece collectors, anime lovers and model‑painting enthusiasts.

🖨️ Printing recommendations

Recommended material: PLA or PLA+ (easy to print and great for painting).

Supports: use supports only on critical areas:

Under the nose (if very pronounced)

Under the goggles

Under the slingshot and arms if they create overhangs

Back of the bandana if it hangs

Tree supports recommended to reduce marks.

Layer height: 0.12–0.20 mm (0.15 mm recommended for good face, nose and goggle detail).

Infill: 10–20% for a stable decorative figure.

Base color: light beige/brown if painting everything, or olive green to save paint on the bandana.

Post‑processing: light sanding on face and nose; primer before painting for better adhesion and smooth finish.

Orientation tip: print with hips/legs on the build plate for stability and minimal supports.

Usopp Chibi Figure 🎯🔫

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill