The Wyze Battery Cam Pro and Solar Panel Horizontal Mount will allow you to mount a Wyze Battery Cam Pro and a Wyze Solar Panel to a horizontal surface such as the soffit or ceiling of a building.

Also included is a drilling template to make marking and drilling the mounting holes easier.

Printing:

I printed the mount on a Creality Ender-3 V3 KE using generic PETG filament. I used the default 0.20mm Standard settings as a base but changed the Top and Bottom shell thickness to 5 layers, the Wall loops to 5, the Sparse infill pattern to Gyroid and the Sparse infill density to 35% in Creality Print 6.2 to increase strength. You will need to use a weather resistant filament like PETG if you will be using the mounts outdoors.

I did not use supports.

Assembly/Mounting:

You will need three #6 x 5/8 inch flat head machine screws and nuts to attach the camera flange to the mount. You will also need three #6 x 5/8 inch pan head machine screws and nuts to mount the solar panel flange to the mount. The camera flange requires flat head machine screws for clearance in order for the outer ring to tighten down fully. You may be able to use flat head machine screws for the solar panel flange as well if you don't have any pan head screws.

The holes in the bases of the mount are sized for #8 flat head wood screws. I used four #8 1-5/8 inch exterior wood screws to secure the mount to the soffit of my house. The mount is designed with more than four holes in the base allow for flexibility in drilling mounting holes and the use of more than four mounting screws is unnecessary in most cases.

Wyze Battery Cam Pro and Solar Panel Horizontal Mount

PETG, 0.2mm layer, 5 walls, 35% infill

0.2mm layer, 2 walls, 15% infill