Tips for printing:

Supports: No

Layer height: 0.16mm (optimal)

Wall loops: 3

Infill: 15%

Seam position: back

Wall generator: -

Detect thin walls: No

Brim: Yes

Colors and filament I used (3 Color Version):

PLA / White - for the body and eye

PLA / Black - for the eye

PLA / Pink - for the nose and ears

Or decide for yourself which colors and how many you want to use!

When you decide to print my multicolor Pre-Sliced (3mf file) I would recommend printing several models at once, not just one, to reduce waste!

----------------------------------------

Multiple Parts:

Tips for printing:

Supports: Yes (tree)

Layer height: 0.10mm (fine (looks better)) or 0.16 (optimal)

Wall loops: 3

Infill: 15%

Seam position: back

Wall generator: -

Detect thin walls: No

Brim: Yes

You can now print out several parts and simply glue them on

The mouth, nose and cheek with the body do not go together easily. Please use a file or something else and carefully try to file away any unevenness!!!!!

There are points on every part to help you guide the parts in the right place! Below I wrote a small documentation for assembling.

First: The ears and eyes are easy to attach, you can glue them right away! For the mouth part put the cheek together with the nose and mouth. Don't use any glue jet!

Second: Now lightly press the parts into the body. See if these fit perfectly if not file a small part away or there is still a small bead (brim) on the parts! We have to do this because the tolerances are extremely small so that it looks good in the end. If everything fits afterwards, you can glue them and press them in with a little bit of force.

Finished! :)

Cute Cat

Multipart 0.16mm layer, 3 walls, 15% infill

Multicolor 3 Color 0.16mm layer, 3 walls, 15% infill

0.2mm layer, 2 walls, 20% infill