大疆遥控器 DJI RC-N1平板外挂支架 | DJI RC-N1 Remote Controller Tablet Mounting Bracket

>> 模型介绍 | Model Introduction >>>>>>>>

让大疆RC-N1遥控器支持挂载平板。

理论上支持所有同等大小的平板，已添加源模型文件，请根据需求打印相应大小物件。

源模型为支持iPad Pro (2018版) ，所以稍加做了改动：

1.对原模型做了三角拉力支撑点；

2.修改支架长度以便支持对小一寸的平板挂载，最大化适配包括iPad之外的更多平板。

3.更小的平板，如iPad mini大小的平板请自行根据需要修改模型的长度；

This design theoretically supports all tablets of similar size. The original model files are included, allowing you to print the object in the appropriate size according to your requirements.这种设计理论上支持所有类似尺寸的平板电脑。包含原始模型文件，允许您根据您的要求以适当的尺寸打印对象。

Modifications Made: 修改:

1.Triangular Tension Support Points: Added triangular tension support points to enhance stability.1.三角形拉力支撑点：增加三角形拉力支撑点，增强稳定性。

2.Adjusted Bracket Length: Modified the bracket length to accommodate slightly smaller tablets, ensuring broader compatibility with various tablet models, not limited to iPads.2.调整支架长度：调整支架长度，以适应稍小的平板电脑，确保更广泛的兼容各种平板电脑型号，而不仅仅局限于ipad。

3.Customization for Smaller Tablets: For smaller tablets, such as those similar in size to the iPad mini, users may need to adjust the model length accordingly.3.定制小型平板电脑：对于较小的平板电脑，例如与iPad mini尺寸相似的平板电脑，用户可能需要相应地调整型号长度。

>> 打印配置 | Print Settings >>>>>>>>

（仅参考，可自定义）

(Referential, Customizable as Needed)（参考，可根据需要定制）

耗材 Filament：PETG

填充 Infill：15%

填充图案 Infill Pattern：网格 Grid

支撑 Support：需要 Required

Brim/Raft: None 边缘/筏:没有

>> 组装说明 | Assembly Instructions >>>>>>>>

即打即用，无需组装；

Print and Use Immediately; No Assembly Required；立即打印使用；无需装配；

>> 其他说明 | Additional Notes >>>>>>>>

1. 模型使用 Blender 4.2.5LTS制作。

2. 可根据协议 CC BY-NC-SA 4.0 自行修改为所需样式使用。

3. 无论如何，遇见是缘分，能用是巧合，留个言点个赞，关注收藏一起浪。

1. The model was created using Blender 4.2.5 LTS.

2. You are free to modify it as needed to suit your desired style under the terms of the CC BY-NC-SA 4.0 license.

3. Anyway, meeting is fate, being able to use it is coincidence. Leave a comment, give a like, follow and save, and let's ride this wave together.

>> 声明 | Statement >>>>>>>>

由于个人时间和精力有限，本人仅通过个人注册的平台和账号以及个人拥有的域名（PoweredBy.CN）发布模型相关信息。其他非个人注册、授权的平台和账号发布涉及到本人制作的模型图纸均与本人无关且涉嫌非法获利，本人保留追偿权利。本人在互联网上一直秉承着“自由分享，免费共享”的理念，对已公开发布的模型图纸不会以任何理由限制下载（包含但不限于收费制、会员制、积分制等限制），请注意甄别！

所有自造物件使用的知识共享许可协议：CC BY-NC-SA 4.0

Due to limited personal time and energy, I only release model-related information through platforms and accounts registered under my personal name, as well as the domain name owned by me (PoweredBy.CN). Any distribution of model drawings related to my work on platforms or accounts that are not personally registered or authorized is unrelated to me and may involve illegal profit-making. I reserve the right to seek compensation for damages. I have always adhered to the principle of "free sharing and open access" on the internet, and I will not impose any restrictions (including but not limited to paywalls, membership requirements, or point systems) on downloading publicly released model drawings. Please verify the authenticity of the source! 由于个人时间和精力有限，我只通过以个人名义注册的平台和账号，以及我拥有的域名（PoweredBy.CN）发布模特相关信息。在未经本人注册或授权的平台或账号上发布与本人作品相关的模型图，与本人无关，可能涉及非法牟利。我保留要求赔偿损失的权利。我在互联网上一直坚持“免费分享、开放获取”的原则，不会对公开发布的模型图纸下载进行任何限制（包括但不限于付费墙、会员要求、积分制度）。请核实消息来源的真实性！

All self-made objects are licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0).所有自制物品均遵循知识共享署名-非商业性-相同方式共享4.0国际许可协议（CC BY-NC-SA 4.0）。

DJI RC-N1平板支架 | Remote Controller Tablet Mounting Bracket

0.2mm layer, 2 walls, 30% infill

0.2mm layer, 2 walls, 15% infill

Origineel