"GBC - Animal Breeder 4 JPN - Polar Bear 11, 2 filament change" by "PPAC"

Slicer : Creality Print v6.0.2.1574 (win)

Printer : Creality Hi (0.4 nozzle, Firmware v1.1.0.36) + CFS (Firmware v1.1.2)

Bed type : Epoxy Resin Plate

Filament(s) :

1 : White, "Hyper PLA @Creality Hi 0.4 nozzle" (Flow ratio : 0.95, Nozzle (First layer : 220°C, Other layers : 220°C), Bed (First layer : 60°C, Other layers : 60°C), Max volumetric speed : 23 mm³/s ).

2 : Gray, "CR-Silk @Creality Hi 0.4 nozzle" (Flow ratio : 0.95, Nozzle (First layer : 220°C, Other layers : 220°C), Bed (First layer : 60°C, Other layers : 60°C), Max volumetric speed : 10 mm³/s ).

3 : Black, "Hyper PLA @Creality Hi 0.4 nozzle"

Process | Global

0.20mm Standard @Creality Hi 0.4 nozzle

- Quality

- Layer height : 0.2 mm

- First layer height : 0.2 mm

- Seam, Seam position : Aligned

- Strength

- Wall, Wall loops : 2

- Infill, Sparse infill density : 15%

- Support

- Enable support : false ( = unchecked )

- Other

- Bed adhesion

- Brim type : Auto

All file(s) at 100% scale.

Plate 1 :

Mesh(s) : GBC - Animal Breeder 4 JPN - Polar Bear 11.stl

// With 2 filament changes (

from filament 1 to filament 2 at the start of layer 3 (Z=0.60 mm),

from filament 2 to filament 3 at the start of layer 5 (Z=1.00 mm)

)

Filament used : Hyper PLA RFID White Creality, High Speed PLA Gray Anycubic, PLA Recyclé ArianePlast.

Happy printing.

GBC - Animal Breeder 4 JPN - Polar Bear 11, 2 filament chang

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill