Hueforge of an advertising poster featuring Kylo Ren for the release of Star Wars - The last jedi.

Cropped to 4/3 (200*150) to make it easier to find a frame

The photos shows the result in 200*150 and a nozzle of 0.4

You can change the X and Y dimensions but do not change the Z dimensions

HueForge is a software that enables users to create detailed multi-color 3D prints using a technique called filament painting, which does not require a multi-material 3D printer (but a MMU/AMS/CFS... makes printing easier)

You must define the printing parameters indicated in the description below and change the filament on the indicated layers.

Hueforge description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 149.9x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 1.5mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Marron Red Transmission Distance: 1.3

PLA BambuLab Basic Brown Transmission Distance: 2

PLA BambuLab Matte Dark Brown Transmission Distance: 2

PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 5 unique filaments

Swap Instructions:

Start with Black

At layer #6 (0.56mm) swap to Marron Red

At layer #8 (0.72mm) swap to Brown

At layer #10 (0.88mm) swap to Dark Brown

At layer #12 (1.04mm) swap to Jade White for the rest.

Hueforge Finn - Star Wars - The last jedi

0.08mm layer, 1 walls, 100% infill