!!!ATTENTION!!! At the recommendation of a fellow printer I'm adding some clarifaction up top. This remix requires the printing of two DIFFERENT corner pieces. If you ignore this and print four of one corner, the riser will not fit properly. Please refer to the pictures and the text lower in this description.

Update March 18th 2026

I'm still getting reports that the riser is not fitting for some people, while others suggest it fits fine. Without a K2 I rely completely on feedback for modifications. For those interested in making their own modifications I've uploaded the Autodesk Fusion file I used. This is NOT an original source file. I can't upload the source file to CC so I've uploaded it elsewhere. Please check the comments for more information.

Updated January 24th 2026

After some feedback suggesting the riser was too tight, I've adjusted the corners by 1mm in each direction. This gives an additional 2mm of wiggle room for fitting the riser. I was told by 2mm and 3mm, so I chose 2mm to start with. This should meet the newly confirmed dimensions. The original 3mf file I posted has been updated with these corners.

Updated Jan 11th 2026

**This has been moved from prototype to an official and confirmed model. Special thanks to @Klaasie for taking the time to confirm the fit and report back. @Klaasie used the 21mm corners, mentioning that one was a little tight, but it worked well. I've removed the 19mm and 20mm corners (stl's) from the files, but left the 22mm corners incase someone else finds the 21mm to be too tight. The 3mf will still contain the 21mm corners. For questions on assembly, please reference the diagram in the pictures.

This is a prototype version of the Remixed Abernus Riser (chamfered version) originally made for the K2 Plus, now for the K2. The simplest way to remix the original was to simply adjust the dimensions of the corners so the vented sides could remain intact. The radius of the corners also had to be adjusted and this is where I am a little unsure of things. I've included corners with radius' of 19mm through 22mm because I don't own a K2 printer to test fit the model. With creators inquiring whether it would work for the K2, I thought I'd do my best to make it happen, but I can't do it myself. I believe the best fit will be 21mm based on some other riser models I've seen and measured from CC, but we won't know until someone confirms this. If 21mm is too large, print the 20mm and try again. If 21mm is too small, try 22mm. I can make further adjustments to the corners if needed.

2x Corner #1

2x Corner #2

2x Riser Sides

2x Riser Front/Back

2x Riser Slide Vent Sides

2x Riser Slide Vent Front/Back

I've created a 3mf containing all the necessary files, using the 21mm corners that are the most likely to work. I'll update the file if/once I can get confirmation of which corners fit best.

This riser has been very popular with the K2 Plus as well as the K2 Pro. It was only with some else's help/feedback that I was able to make the version for the Pro. So, I'm hoping to get similar feedback for the K2. Happy printing! Hopefully someone stumbles across this and is willing to be our crash test dummy.

K2 Riser - Abernus Remix

0.2mm layer, 3 walls, 15% infill

0.2mm layer, 3 walls, 15% infill PLA

0.2mm layer, 3 walls, 15% infill PETG speed adjustment

Origineel