An easy and quick to print removable shopping cart key / chip that you will never forget or lose again. Fits and integrates on any key ring or key organizer.

Advantages

- Easy and fast to print in less than 5 minutes

- Use your filament leftovers. You need only approx 2 g of filament

- Fits and integrates on any key ring or key organizer

- Ready to print, .stl and .3mf included

- No supports needed

- No special slicer settings, apart from the 100% infill

- You can use your preferred material and print in PLA, PETG, ABS a.s.o.

- For the displayed models I used SUNLU PETG Grey

- Commercial use allowed

Commercial use: You can use the key for commercial purposes for free, but you are not allowed to change the logo and you need to name it as „designed by 2Kperformance“.

Printing and settings

Print with standard slicer settings, but 100% infill, and a layer height of 0.2 mm. The attached .3mf are configured for PLA. Change it according to the type of filament you use if necessary.

Printer: Creality K1C 0.4 nozzle

Bed type: Textured PEI Plate

Filament: Creality Generic PLA

Process: 0.2 Standard

Layer height: 0.2 mm

Sparse infill density: 100%

Removable Shopping Cart Key / Chip / Token, easy to print

0.2mm layer, 2 walls, 100% infill

0.2mm layer, 2 walls, 15% infill