This versatile accessory combines an adjustable mount for your FPV antenna (or a cylindrical tube/element) with a practical integrated storage tray. It's the ideal solution for organizing space on your FPV drone or workbench, allowing you to keep small components or screws close at hand while your antenna is securely positioned and oriented at the desired angle.

The part with the round attachment can accommodate a VTX antenna with a tubular base or another cylindrical component, while the tray underneath offers a convenient space for small parts.

Features:

Combined design: antenna/tube mount and storage tray.

Adjustable angle to optimize antenna positioning.

Great for organizing small components during drone assembly or maintenance.

Support-free printing for most printers.

⚙️ Recommended Print Settings:

Material: PETG for a good balance of strength and flexibility, or PLA/PLA+ for ease of printing and non-critical use. ABS/ASA if higher heat resistance is desired.

Layer Height: 0.2mm

Infill: 20-30% for a good balance of strength and weight.

Walls/Perimeters: 3-4 to ensure sturdiness.

Supports: Should not be necessary if printed with the base flat on the print bed. Check your slicer preview for the adjustable part if there are excessive overhangs.

Orientation: Print the base flat on the print bed for maximum stability and ease.

AOS 7 Falcon support GPS bn880+dji caddx longrange trasmisio

0.2mm layer, 2 walls, 15% infill