Bead Weaving Machine – printed on K2 Pro

A simple model with three drawers for beads and other accessories.

Print it using a sturdy material such as PETG.

There are two versions of the weaver: one magnetic and one classic.

The magnetic version prevents the drawers from opening during transport

and keeps the beads from falling out.

For both versions, you need to print:

- Weaver: 1 pc

- Drawers: 3 pcs

- Button: 3 pcs

- Side tensioner: 2 pcs

- Comb: 2 pcs

For the magnetic version, you will also need 12 magnets with a diameter of 10 mm and a thickness of 2 mm.

When printing the weaver, you need to add a pause, insert the magnets, and let the printer seal them inside.

For the drawers, you can simply place the magnets in or glue them.

Pay attention to the magnet orientation!

If you don’t know how to add a pause, you can download pre-sliced files with the pause already included.

For assembly, you only need to snap the buttons into the drawers and screw the side tensioners onto the sides of the weaver.

How to start weawing:

When you want to start, thread the cord from the tensioners through the combs to the other side, wrap it around the second tensioner, and pass it through the combs again. You can place the combs into the slots according to the width you want to weave.
You can find better weaving tutorials on YouTube. Good luck, and I hope the model serves you well.

Bead weawing machine

Without magnets 0.2mm layer, 2 walls, 35% infill

Magnetic version, 0.2mm layer, 2 walls, 35% infill PETG

0.2mm layer, 2 walls, 15% infill