Hi friends, for our new jewelry line we are dedicating ourselves to creating rings, printable in resin.
This first ring model is very simple, it has dimensions of approximately 22mm, which you can scale according to your size. The 22mm include the external diameter, so the internal diameter is around 20mm.

We printed it with our Elegoo Saturn 3 ultra, with standard green resin.
As for the print settings, the basic ones for printing a standard resin should be fine.
As you can see from the attached photos we painted them with silver and gold acrylic paint.

The files you find are in STL format, for those who are not able to print this format, write to us privately and we will create the format best suited to your needs.

As always we thank you for the support you give us, if you like our designs follow us and support us also on our social pages (Instagram and tiktok, X) Shack3d_print.
We would be happy to see the result of your prints, share the photos with us by tagging us on our social pages, don't be shy.
Thank you so much.

3D PRINTING SETTINGS

Printed with Elegoo Saturn 3
Resin: standard resin 3djake
Slicer: Chitubox
As for the print settings, the basic ones for printing a standard resin should be fine.

Hexagonal Ring