Rafts:

Doesn't Matter

Supports:

Yes

Infill:

50%

Notes:

0.12mm layer

2 walls, 50% infill

Auto tree support, build plate, critical (tree support is what I used)

Print time <45min

Post-Printing

The model is very tiny, very functional, and fun to play with. But since it is so small, the imperfections on the ball joints can cause problems. Doesn't have to be pretty, doesn't have to be perfect, but file/sand it down a bit.

This action figure is tiny, tiny, tiny. The ball joints WORK really good but make sure they are smoothed after printing before assembling. The imperfections like shown in the image below will cause the ball joints to NOT work.

Edit: Honestly, this little action figure is pretty cool, but it's not the most sturdy. I've printed quite a few and the joints are hit or miss, or maybe my smoothing technique isn't the best. I'm still a novice when it comes to 3D models. I was going to take this print down, or make it private, but decided to leave it up since it can be cool. Print at your own risk! Lol

mini 13

0.2mm layer, 3 walls, 15% infill

0.2mm layer, 2 walls, 15% infill