🐴🔥 Design Concept

This multicolor Horse magnet celebrates the Year of the Horse 🏮🎊 through a dynamic rearing pose that symbolizes:

✨ Strength

✨ Freedom

✨ Energy

✨ Good Fortune

The surrounding hearts ❤️ and rose 🌹 add warmth, passion, and positive vibes for the new year.

The model was carefully designed with:

✔ Clean multicolor separation 🎨

✔ Strong outlines for crisp details 🖊️

✔ Shallow embossed geometry for reliable FDM printing 🖨️

✔ Smooth surfaces for high-quality face finish ✨

The goal was to combine symbolism with easy printability and a modern decorative look.

🎯🧲 Purpose

Designed as a functional refrigerator magnet, this piece can be used as:

🏮 A Year of the Horse decoration

🍀 A lucky charm

🎁 A small gift for horse lovers

🏠 A stylish fridge accessory

Compact, lightweight, and beginner-friendly for FDM printers.

📏 Model dimensions

• Approximately 50.1 × 50.1 × 3.0 mm

🖨️ Printing Recommendations

• Print face-down to achieve the best front surface quality

• Use a 0.4 mm nozzle with 0.16–0.20 mm layer height

• 50% infill recommended for strength

• No supports required

• PLA recommended

• Multicolor setup (4 colors): Red, White, Black, and Gray

🧲 Assembly Instructions

After printing, insert a 10 × 2 mm neodymium magnet into the rear slot (designed with a small tolerance for easy insertion).

Secure the magnet in place with a small drop of glue. 🧴

For a slightly raised fit that creates a small gap from the surface it attaches to (e.g., a refrigerator), you may use a 10 × 3 mm magnet instead. 📏

No additional assembly required.✅

Enjoy printing! 🎯

🌐 Created by MakeNow's SnapForm (https://makenow.crealitycloud.com)

🐴 Multicolor Horse Magnet – Year of the Horse 🧲✨