Design Concept

The Print In Place Grocery Bag Assist V2 is designed to provide ergonomic support when lifting and carrying multiple bags. Its contoured shape fits comfortably in the hand, reducing strain. The V2 design features a rotating handle which allows the bag to be level no matter where you grab.

Uses

This assist tool is perfect for helping carry groceries, shopping bags, or similar loads with ease, enhancing user convenience and reducing hand strain.

Printing Suggestions

Use a durable filament such as PETG or ABS for added strength. Recommended print settings include a layer height of 0.2mm and infill of 20% to maintain strength while saving material. However, for heavier loads print at much higher infill such as 55-70% infill. Print in this orientation with Tree supports turned on:

Assembly Instructions

No assembly is required; it’s printed in place and ready to use right off the printer; only thing to do is spin the handle.

V2.2 update: You can now hold the bag up to 90 degrees without it falling off.

Any question? Feel free to ask!

Happy printing! -3DP_C

Print in Place One Hand Bag Assist V2.2

0.2mm layer, 2 walls, 15% infill