A menacing skeletal warrior clad in jagged armor, wielding a massive sword and shield. The figure stands in a battle-ready stance atop a textured base, exuding a dark and intimidating presence.

Creality Ender 3 V3

FDM Printer

Layer Height: 0.08–0.12 mm (fine detail for minis)

Nozzle: 0.2–0.4 mm (smaller is better for detail)

Infill: 15–20% (higher if you want durability)

Perimeters/Walls: 3–4 walls for strength

Supports: Tree

Print Speed: 30–40 mm/s for accuracy

Material: PLA for easy printing, PETG/ABS for more strength

RESIN PRINTER (Best for miniatures)

Layer Height: 0.02–0.05 mm (20–50 microns) for best detail

Exposure Time: Depends on resin & printer, usually 2–3s per layer

Bottom Layers: 6–8 with longer exposure (30–50s each) for adhesion

Supports: Use medium supports under arms, sword tip, and shield edges (to prevent warping/failure)

Orientation: Tilt model 30–45° to reduce suction forces and improve detail

Wash & Cure: IPA wash + proper UV cure for durability

✅ Resin will capture the armor, skull, and texture detail perfectly.

Skeleton Warrior