Timon Chibi Figure 🐾🌞

Bring Timon’s wit and charm to your shelf with this Timon Chibi Figure in low‑poly style and a seated pose. Perfect for The Lion King fans who enjoy 3D printing and hand painting.

🐾 Charming design: Chibi proportions, expressive face and segmented tail in a stylized geometric look.

🎨 Made for hand painting: Optimized to print in one or a few colors and then paint with acrylics (beige/brown tones, eye and tail stripe details).

🧑‍🎨 Fully customizable: Great for washes, dry‑brushing, cartoon or realistic finishes.

🎁 Ideal gift: Perfect for collectors, geek decor and fans of the classic.

🖨️ Printing recommendations (English)

Recommended material: PLA or PLA+ (good paint surface and easy printability).

Supports: use supports only on critical areas — under the jaw/chin if there are overhangs, tail connection if pronounced, and inner ear cavities. Tree supports recommended to reduce surface scarring.

Layer height: 0.12–0.20 mm (0.15 mm is a sweet spot).

Infill: 10–20% for a lightweight yet stable piece.

Base color: light grey/white if painting everything; beige/brown to save paint on the body.

Post‑processing: light sanding where needed; apply primer before painting; finish with matte/satin varnish.

Orientation tip: print seated with hips/feet on the bed to maximize stability and minimize supports.

Timon Chibi Figure 🐾🌞

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill