Design Concept

This CREALITY-themed figurine combines the brand's logo with a playful, robotic design. The figurine features a triangular head with the CREALITY logo, robotic arms and legs, and a base with the CREALITY name. The design is both whimsical and futuristic, making it an ideal decorative piece for fans of 3D printing and technology. The figurine is designed to be assembled from multiple printed parts, allowing for customization and easy printing.

Print Settings

The figurine is printed using a K2 Plus printer. The recommended layer height is 0.2mm, which balances detail and print speed. With 2 walls, the parts are sturdy enough for assembly and handling. A 15% infill provides sufficient structural integrity without excessive material usage. PLA material is recommended for its ease of printing and good finish. Supports are needed for overhanging parts, especially on the arms and legs. The print time for each part varies, but the total print time for all parts is approximately 8 - 10 hours.

Assembly

The figurine requires assembly after printing. The parts include the head, body, arms, legs, and base. First, attach the arms and legs to the body using a small amount of adhesive. Then, attach the head to the body. Finally, place the assembled figurine onto the base. Ensure that all parts are properly aligned and secured for stability.

Creality Maker-45cm (United Kingdom)

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill