A stylized collectible diorama inspired by Frieren caught inside a classic mimic chest.
This model is designed as a fun display piece with a strong silhouette, detailed treasure chest sculpting, and a scenic stone base that makes it perfect for anime and fantasy figure collections.

This version features the full mimic scene as a finished diorama.
If you want a separate character model, there is also a separate Frieren version available in my profile.

The model is ideal for resin 3D printing and works great as a shelf display, collector’s piece, or painting project.

Included concept:
Stylized Frieren trapped in a mimic chest
Detailed mimic with teeth and wood texture
Scenic round stone base
Designed for display and collectible presentation

Printing Instructions
Recommended printer: Resin printer (for example Creality Halot R6)

Important:

Supports are NOT included in the STL files
Please add supports manually in your slicer software (for example Halot Box, Lychee, or Chitubox)
Recommended resin print settings (good starting point):
Layer height: 0.05 mm
Bottom layers: 4–6
Bottom exposure: 25–35 seconds
Normal exposure: 2.0–3.0 seconds
(depends on your resin and calibration)
Lift distance: 6–8 mm
Lift speed: moderate
Anti-aliasing: optional

Printing tips:
Print larger detailed parts at an angle of around 30–45°
Make sure to place enough supports under:the chest lid
lower edges of the chest
boots and underside of the base
deeper overhang areas inside the mimic
Check for islands before printing
Wash and fully cure parts after printing
Dry fit parts before gluing if you split the model into pieces

Frieren vs Mimic – Collectible Diorama STL