Boost Me

if you Enjoy, feel free to boost! :)

Boost

A strong, compact and easy-to-print wall-mounted hook designed for organizing cables, hoses, extension cords, air hoses, workshop tools and garage accessories. The V3 design features a reinforced curved cradle, a clean screw-mounted backplate and a practical no-support print orientation.

Print Description:

Heavy-Duty Universal Wall Hook V3 – Cable, Hose & Extension Cord Organizer

This Heavy-Duty Universal Wall Hook V3 is designed for practical garage, workshop, utility room and home organization. It is a compact but strong wall-mounted hook made to hold coiled cables, extension cords, air hoses, garden hoses, charging cables, rope, straps and other everyday tools or accessories.

The V3 design uses a smooth curved cradle that supports round items naturally instead of creating a sharp pressure point. The reinforced lower structure and open triangular support section help keep the hook strong while reducing material use and print time. The vertical backplate includes a main screw-mounting point and a slim side cutout detail, giving the hook a clean technical look while keeping the design practical and easy to install.

This model is especially useful for organizing messy cables and hoses in garages, workshops, sheds, utility rooms, tool walls, storage cabinets, 3D printing rooms and DIY workspaces. It can be mounted on wood, wall panels, workshop cabinets, pegboard-style backboards or directly onto a wall depending on your screw choice and surface material.

The hook is designed to be printed without supports when placed in the recommended orientation. PETG is recommended for the best balance of strength, flexibility and temperature resistance, especially for garage or workshop use. PLA can work for lighter indoor use, while ABS/ASA may be suitable for more demanding environments if your printer is properly enclosed and tuned.

Approximate model size from the STL: 122.8 mm × 119.4 mm × 25.0 mm.

Key Features
Heavy-duty wall-mounted hook for garage and workshop organization
Designed for cables, hoses, extension cords, ropes, straps and accessories
Reinforced V3 geometry with a curved load-bearing cradle
Compact footprint with strong practical holding capacity
No-support print orientation
PETG recommended for strength and durability
Works well for tool walls, cabinets, shelves, utility rooms and DIY workspaces
Clean modern design with visible functional reinforcement
Easy screw-mounted installation
Suitable for multiple colors and workshop setups

Practical Use Cases
Use this wall hook for:

Extension cords
Charging cables
Air hoses
Garden hoses
Vacuum hoses
Rope and cordage
Tie-down straps
Lightweight tools
Workshop accessories
Garage wall organization
Utility room storage
3D printer room cable management

Print Settings
Recommended material: PETG
Alternative materials: PLA for light indoor use, ABS/ASA for advanced users
Layer height: 0.20 mm
Nozzle: 0.4 mm
Walls/perimeters: 4–6 walls
Top/bottom layers: 5–7
Infill: 35–50%
Recommended infill: 40% gyroid, cubic or grid
Supports: No
Brim: Optional, recommended if bed adhesion is weak
Print orientation: Flat on the back/side according to the uploaded profile
Cooling: Moderate for PETG
Strength priority: Increase walls before increasing infill
Suggested filament: PETG for garage, workshop and utility use

For heavier loads, use PETG or stronger material, increase wall count, use proper screws and mount the hook into a solid surface such as wood, stud, cabinet side panel or suitable wall anchors.

Installation Instructions

Print the hook using the recommended orientation.
Let the part cool fully before removing it from the build plate.
Check the screw hole and remove any small stringing if needed.
Choose screws suitable for your wall or mounting surface.
For drywall, use proper wall plugs/anchors.
For wood or cabinet mounting, pre-drilling is recommended.
Tighten the screw firmly, but do not overtighten and crush the printed part.
Test the hook with a light load first.
Add heavier cables or hoses only after confirming the hook is secure.

Recommended Print Orientation
Print the hook in the provided no-support orientation. This gives the best balance between strength, print quality and ease of printing.

Material Recommendation
PETG is recommended for practical workshop use because it offers better toughness and temperature resistance than standard PLA. PLA can be used for lighter indoor storage, but PETG is the preferred material for garage or utility room use.

Mounting Recommendation
Use a screw size suitable for your wall or cabinet material. For drywall, use proper wall anchors. For wood, cabinets or workshop panels, pre-drill the hole and tighten carefully.

Strength Tip
For heavier cables or hoses, use at least 4–6 walls and around 40% infill. More walls usually improve strength more effectively than only increasing infill.

Important
The load capacity depends on filament, print quality, screw type and mounting surface. Always test with a light load first.

Why this design?

This hook was designed to solve a common garage and workshop problem: messy cables, hoses and extension cords that are difficult to store neatly. Instead of using a thin sharp hook, this model uses a wide curved cradle that supports the cable or hose more evenly. This helps the coil sit naturally on the hook and makes the storage area look cleaner and more organized.

What is improved in V3?

The V3 version has a more reinforced shape compared to a simple basic wall hook. The curved main arm, lower support structure and open reinforcement cutouts are designed to provide strength while keeping the model efficient to print. The design is compact, practical and visually clean, making it suitable for both garage walls and more organized workshop setups.

Best used for:

This wall hook is ideal for organizing extension cords, charging cables, air hoses, garden hoses, vacuum hoses, ropes, straps and other coiled accessories. It can also be used as a general-purpose utility hook in a garage, shed, workshop, utility room, 3D printing room or home storage area.

Recommended mounting surfaces:

For best results, mount the hook on a solid surface such as wood, plywood, a cabinet side panel, a workshop wall panel or a wall stud. It can also be installed on drywall or masonry if suitable wall plugs or anchors are used. Always choose screws and anchors based on the wall material and the expected load.

Material guide:

PETG is recommended for most users because it offers a good balance of strength, toughness and temperature resistance. This makes it a better choice for garage or workshop use than standard PLA. PLA can still be used for lighter indoor storage, while ABS or ASA may be suitable for more demanding environments if your printer is properly tuned and enclosed.

No-support print design:

The model is designed to print without supports in the recommended orientation. This reduces material waste, shortens print time and makes post-processing easier. After printing, only minor cleanup may be needed around the screw hole or edges depending on your slicer settings and filament.

Print profile note:

A PETG no-support print profile with 40% infill is recommended for a strong and reliable result. The model can be printed with a standard 0.4 mm nozzle and 0.20 mm layer height. For maximum strength, use enough walls and avoid printing too fast if layer adhesion is important.

Real-world use:

This model is intended as a practical, functional print for real garage and workshop organization. The shape is made to hold coiled items securely while keeping them easy to remove when needed. It is especially useful for keeping frequently used cables and hoses off the floor and within easy reach.

Universal storage use:

The hook is not designed for one specific cable or hose size only. It can be used with many different coiled items depending on diameter, weight and flexibility. Smaller extension cords, air hoses, charging cables, garden hoses, rope and straps can all be stored neatly on the same basic hook design.

Customization idea:

Print the hook in different colors to match your workshop, garage wall, tool brand or storage system. Red, black, gray, orange and blue work especially well for tool walls and garage organization. You can also print multiple hooks and place them side by side for a complete cable and hose storage system.

Designed for practical everyday use:

This model was created to be simple, strong and useful. It is easy to print, easy to mount and helps keep your workspace clean. A small functional print that can make a big difference in garage, workshop and utility room organization.

Garage Wall Hook (V3) for Cables, Hoses & Extension Cords

Creatility Hi - Best Details 60% infill

Strongest /& Best Quality and Finnish

Creatility K2 Plus - Best Details 60% infill