Design Concept

The K2 Plus Raiser is designed to enhance 3D printer capabilities by providing a sturdy and efficient raiser for larger print volumes.

Usage

This raiser is essential for users requiring higher print dimensions and aiming to utilize full printing potential in larger setups.

Print Recommendations

Utilize strong filament materials like PLA or ABS to ensure durability and stability. Ensure calibration settings are adjusted for large builds.

This is only a beta.

Print on own risk :D

FRAME:

0.2 Layerhight

3 Walls

Support :Tree ( on buildplate only)

Brim 5

Vent:

use a very small layerhight or adaptiv layerhight

( i used adaptiv ) because of the very small threads.

Install:

befor you slide the 4 Frame parts together make sure the Vents are in. There is one long and one short Vent per Frame part.

After you installed the vents screw in the screwpins and secure it with glue so it dont brake so easy. (make sure the threads work befor glue)

now you can glue in the LEDs , sit it on your printer, unplug the front led and plug your led-conector in.

For the Led strips i used

8mm COB LED 24V

1,25mm JST 2-PIN Conector

K2 Plus Raiser

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill