PlayStation module holder

1) General Information

This model is the first in a new series. On the one hand, it can store all kinds of small parts, but above all, as I have planned, it can be combined with my other PlayStation models, so that this model is the "shell" into which the other models can be installed. It is therefore modular and you can carry the individual modules around without having to move this holder.

2) Size and printing settings

2.1) Size

The model measures 13.25cm * 13.25cm * 6.625cm (length*width*height) and has a storage space of almost 1100 cubic centimeters. The modules fit perfectly into this storage space.

2.2) Printing settings

- Printer: Creality Ender 3 Neo

- Material: Jayo (color: white)

- Best Printing Temperature: 195°C

- Best Build Plate Temperature: 67°C

- Speed: 60mm/s

- Printing Time: about 13 to 14 hours

3) Question

But I have a question: Why do small gaps sometimes form between the individual layers where the model can easily break apart? If anyone knows the answer to this, please write to me using the comment function below, because I really don't know what could help. Thanks in advance :)

Attention: Different settings may be necessary for other materials. It's best to try out your own model to see which settings are necessary.

Tip: First, let the extruder drive a little slower (e.g. with only 75%) to create an optimal grip between the bed and the model.

Important note: This model is NOT an official product of PlayStation and/or its partners. The PlayStation logo used in the model comes from the logoenvector.com website. The necessary credits can be found below.

If you have any questions or suggestions, you can reach me via the comment function below :)

Credits:

https://logosenvector.com/logo/playstation-4530.php?lang=en (PlayStation-Logo)

Translated with DeepL.com

PlayStation Module Holder

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill