Pumba Chibi Figure 🐗😄

Bring playful charm to your shelf with this Pumba Chibi Figure in low‑poly style and a seated pose. Great for The Lion King fans, collectors and makers who enjoy hand‑painting their prints.

🐗 Charming design: Stylized features emphasizing tusks and Pumba’s friendly grin.

🎨 Made for hand painting: Optimized to print in one or a few colors and then painted with acrylics (browns, beige snout, off‑white tusks).

🧑‍🎨 Customizable: Works well with cartoon finishes, weathering, or alternative color schemes; suitable for washes and dry brushing.

🎁 Great gift: Fun decor for geek desks, kids’ rooms and themed collections.

🖨️ Printing recommendations (English)

Recommended material: PLA or PLA+ (easy printing and good paint surface).

Supports: use supports only on critical areas: under the snout if overhanging, underside of ears, and small cavities under belly. Tree supports advised to minimize surface marks.

Layer height: 0.12–0.20 mm (0.15 mm recommended).

Infill: 10–20% for a stable decorative piece.

Base color: medium brown or light grey/white if painting all details.

Post‑processing: light sanding where needed; primer before painting; seal with matte/satin varnish when finished.

Orientation tip: print with the belly/feet on the bed to maximize stability and reduce support needs. 🐗😄

Pumba Chibi Figure 🐗😄

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill