This super cool cocktail fork set is sure to make your next party the talk of the town!

Print them all and you’ll be the host with the most, no doubt about it!

Design Concept

The Summer Party Cocktail Fork Set is designed for casual and festive occasions, featuring playful and colourful shapes like stars, hearts, and fruit to match the lively atmosphere of parties and gatherings.

This set comes with seven unique cocktail forks and a handy, custom-designed, fork set holder.

The holder has seven individual compartments to store multiple prints of each type or group them together to form seven sets – you choose!

Purpose

These cocktail forks are perfect for picking up appetisers, snacks, or fruits at events like cocktail parties, but they’re great for any event with light snacks or finger food. Why not give them a try at your next barbecue, picnic or #SummerParty?

Just a heads up, don’t use these with hot foods because the heat might soften the plastic and distort the fork shapes. If you’re keen on trying them with warm snacks, consider using food-safe PETG, but chilled or room-temperature snacks are the best bet for these forks.

Printing Recommendations

Use food-safe PLA or PETG for printing to ensure safety and usability.

Bright, contrasting colours enhance the design's attractiveness.

The included print settings file (Creality Print 6.2 3mf slicer file) is designed to make printing a breeze, so just hit print and get this party started!

If you prefer to print STL files, please note the following settings for best results:

1st Layer: 0.2mm

Layer Height: 0.16mm (all other layers)

Infill: 15%

Infill Pattern: Grid or Rectilinear

Only use one wall for the top surfaces (improves the infill pattern quality)

Set for Precise Walls, this is to allow a snug fit on the holder sleeve.

Wall Loops: Use a minimum of two

Tope shell layers:6

Bottom shell layers:4

Surface Patterns: Monotonic

Support: No

Brim: Mouse Ear

Skirt Loops: Optional.

For a manual colour change, insert a pause at a layer height of 2.12mm (layer 13).

Please note this height will only apply if you use the recommended layer settings above.

Assembly Instructions

These forks are printed as a single piece with no assembly required, ensuring ease of use straight off the print bed.

The fork holder prints in two parts that slides together.

It is recommended so carefully smooth the inner surfaces of the sleeve, I used a large nail file.

This will allow the sleeve to slide over the holder frame with easy but do not over do it or else it might have a snug fit.

Did you notice the "Remix Me" model file?

Have some fun and remix the fork by adding your own topper!

Let your creativity take flight and get remixing!

Please reminder to acknowledge my model and share our creations so we can all try them!

Summer Party Cocktail Fork Set (Snack Forks)

0.16mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

Remix Modele