Model will look like this before using glue



This is a Custom Spinning Valentines day ornament for your loved one, thought i would use my imagination on this one and this is what i came up with very happy with this project it turned out better then i expected No Glue is needed for this project but its highly recommended, there is clips at the back of each part that goes together making it very easy to assemble before using any glue (if you do) please make sure you get none on the axis or it will freeze, there is holes in this project put a tiny bit of glue in each one if you prefer for a stronger model

Model will look like this before using glue

3D PRINTING SETTINGS Only 1 requires supports (recommend light trees) and thats the centre heart, please place them all on the flat surfaces to print the model will come in one piece but you can split this for an easy print

No brim
0.16 layer height
0.4 nozzle
Small Supports on middle part
Fast Print if you would like colour but don't have a colourful printer you can switch at a certain layer like i did, very easy to do, if you require any help please message me

VALENTINES DAY | COUPLE SILHOUETTE | HEART SPINNING ORNAMENT

0.2mm layer, 2 walls, 15% infill