RC SCALE EXPEDITION OFFROAD CAMPER

I recommend following the Build Guide when assembling.

The list of necessary hardware is in the Build Guide.

Please contact me in case of questions or any confusion.

010_axle can be reinforced by inserting a 3mm reinforcement (aluminum/fiberglass tube or similar).
010_axle_4mm.stl - for reinforcement diameter 4mm
010_axle_x.stl - without a hole. I recommend strengthening it, for example by gluing carbon strips on the sides.

Printing is not completely complicated, but it is not suitable for beginners.
I recommend printing the body, side panels and frames without a skirt. For the body, I recommend an inner brimm.

Warranty

The author makes no guarantees for completeness and security. The instructions may contain errors in the description of the procedure and in the list of necessary hardware. The author has taken great care in the creation of the print files, but problems can still occur. The author is not responsible for any issues that may arise.

The model is provided as is. The necessary tools must be available for assembly.

If you print it, I'd love to see it. Share here or tag me on instagram.
Instagram: @nb_crawling

NBC.7 - 1:10 Scale offroad camper for crawlers

NBC.7 Body B (with front window)

NBC.7 Body A (without front window)