Summary

Drop in modular mount for Chevrolet and GMC pickup trucks. 2024+ with

13.4" Touchscreen.

Hobby & Makers > Automotive

Tags: mount phone iphone silverado dash chevrolet

Modular drop in dash mount for 2024+ Chevrolet and GMC trucks with

13.4" touchscreen. Additional hardware required for assembly (see BOM

below). The included .f3d file is parametric and will allow inputs for phone

size and desired arm length (go to MODIFY→CHANGE PARAMETERS). STL

file phone holder sized for an iPhone 15 plus with case.

Install all threaded heat set inserts (7xE) into the 4 supports (3 double, 1

single).

Assemble the supports onto the base using (7xF).

Install the base into the pocket of the dash. Installation requires the

removal of the (2) screws from the recesses in the dash pocket. Drop the

base in and install using the (2) removed screws.

Assemble the top mount plate onto the supports of the installed base

using (7xF).

Ruthig25

Chevrolet GMC

Truck Phone Dash

Mount

3D MODEL ONLY

Model files

Install (1) ball mount to the top mount plate using (2xA) and (2xC).

Assemble (1) ball mount to the cell phone holder using (2xA) and (2xB)

Assemble the (4) ball clamps, thumb screws, and mount arm to the cell

phone holder and mount plate ball mounts. Use (2xA) and (2xD) with the

thumb screws to tighten down the arm in the desired location.

BOM:

A - (6) - M5 Nylon lock nuts

B - (2) - M5 x 0.8 x 12mm socket head cap screws

C - (2) - M5 x 0.8 x 14mm socket head cap screws

D - (2) - M5 x 0.8 x 40mm hex head bolts

E - (14) - M4 x 0.7 x 10mm flat head screws

F - (14) - M4 x 0.7 brass threaded heat set inserts

2024 Silverado HD Modular Dash mount By : Ruthig25