Design Concept

I made this little tool holder for my Hi printer. It's very basic but also very functional.

I thought I'd share it with everyone. I still plan to get a bit creative with colours on the logo and sides with the CFS, but for now, here is the standard holder.

Please check the files before you print. There are 3 variants.

I added the 'No-Glue' version on 28/11/2025. Smaller and faster print if you do not need the glue stick holder.

I added a female-Glue Holder on 28/01/2026 on request.

Usage

The holder just clips onto the frame/bridge. It holds the following:

Scraper (Both Versions)

Cutter (Both Versions)

Nozzle Pin (Only Full Version)

Glue stick (Only Full Version)

Printing Recommendations

Print with PLA

15% Rectilinear Infill

2 Walls

You need to enable tree support. They snap off very easy. You can always sand the rough edges a little bit.

Assembly Instructions

Simply snap or slide the tool holder onto your Creality Hi's left frame edge.

Please check - before your print - The tool holder should clear the Z-bar. To be sure, just move the bar all the way to the top and check that it does not touch the holder or any of the tools.

If you find this holder useful in any way - PLEASE leave a LIKE!

Creality Hi Tool Holder

0.2mm layer, 2 walls, 15% infill, tree support

Female Glue Holder - 0.2mm layer, 2 walls, 15% infill

No Glue Stick Holder - 0.2mm layer, 2 walls, 15% infill