Summary: This project provides the STL files for the Deck Panel (Electronics Cover) designed for the Ender 3 Pro to Voron Switchwire conversion (commonly known as "Enderwire").

This panel closes off the top of the electronics compartment, hiding the mainboard, PSU, and messy wiring, giving your printer a clean, professional Voron-style aesthetic.

Key Features:

Clean Look: Seamlessly integrates with the Voron Switchwire-style hexagon skirts.

Cable Management: Protects electronics from debris and hides the wiring nest.

Modular Design: The panel is split into multiple parts to fit easily on a standard Ender 3 build plate (no large-format printer required).

Compatibility: Specifically designed for the Ender 3 Pro frame with Switchwire Y-axis and Z-axis modifications.

Recommended Print Settings:

Material: PLA, PETG, or ABS (PETG or ABS is recommended if your electronics bay gets warm).

Layer Height: 0.2mm or 0.24mm.

Infill: 15-20% (Honeycomb or Gyroid pattern recommended).

Top/Bottom Layers: Use at least 4 or 5 top layers to ensure a smooth surface finish without infill showing through.

Supports: No supports needed if printed flat.

Required Hardware:

M3 x 8mm screws (Button head or Countersunk, depending on your specific remix).

M3 T-nuts (Hammer nuts) for the 4040 aluminum extrusions.

Note: The blue parts shown in the photo are the standard Voron Switchwire skirts modified for the Ender 3 Pro frame. This download only contains the white deck panels.

Deck Panel Elettronica per Ender 3 Pro - Conversione Switchw

0.2mm layer, 2 walls, 15% infill