Project: 40f63cf089b7733e46241a61264130a4.jpg

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

The Model is 112.5x200mm in size

You may print at higher layer heights below the Base Thickness of 0.52mm

The Max allowed Thickness is 3.08mm and the Actual Thickness is 1.24mm

Filaments Used:

#080a0d PLA PolyLite Black Transmission Distance: 0.3

#332445 IMAGE #332445 Transmission Distance: 1

#002775 IMAGE #002775 Transmission Distance: 1

#21d9ff IMAGE #21d9ff Transmission Distance: 1

#f933c4 IMAGE #f933c4 Transmission Distance: 1

This print uses 5 unique filaments

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

!!!! It appears you have Image Colors as Filaments. It will not be possible to print this. !!!!!

Swap Instructions:

Start with Black

WARNING: This Slider is at the same Layer as the Next Slider

At layer #7 (0.68mm) swap to #332445

At layer #7 (0.68mm) swap to #002775

At layer #10 (0.92mm) swap to #21d9ff

At layer #13 (1.16mm) swap to #f933c4 for the rest.

INOSUKE-HUEFORGE