Here is a Commander Deck box that has a protected front display from using a plexiglass sheet in front (A feature I personally really like). It has a nice snap into place lid that uses magnets to stay in place, it holds very well and I have no worries about the lid coming off in my backpack when I go to the local shop to play. The Deck box holds double sleeved cards as well as having a dedicated token area. Its an easy print that can all be printed on 1 build plate.

Print Suggestions.

I used a .16 layer height to get a nice surface finish with 3 walls for extra strength although 2 would be completely fine, 20% infill.

Use supports on build plate for the front overhang, may not be necessary for all printers. I use supports when using my Ender and on my other printer can do overhangs pretty good so I leave them off.

Tolerances are tight on here to minimize gaps between stuff so be aware of that, I haven't had any problems printing on my P1S or Ender 3 so far and I've printed quite a few.

Materials.

You will need Super Glue, Scissors, Magnets, and Plexiglass sheets.

PLEXIGLASS SHEET 0.04" or 1mm - https://www.amazon.com/dp/B09Y2ZGRRB

MAGNETS 8x3mm need 8 per box - https://www.amazon.com/dp/B0CDGYTLH6

SUPER GLUE TO GLUE MAGNETS AND COVER IN

SCISSORS TO CUT PLEXIGLASS SHEET

MTG Commander DeckBox -Protected Window -Fits Double Sleeved