🖨️ Print Setting Description (English)

Description:

This is a custom-designed spool lock to secure filament reels from Hellbot and similar brands that may otherwise spin too loosely or have compatibility issues with automated feed systems. Designed to fit Bambu Lab AMS and Creality CFS, this lock ensures smoother filament feeding and prevents jams or misalignment. Prints quickly and without supports.

⸻

⚙️ Recommended Print Settings:

• Printer Type: FDM

• Material: PLA or PETG

(PETG is recommended for strength and slight flexibility)

• Layer Height: 0.2 mm

• Wall Line Count: 3

• Top/Bottom Layers: 4

• Infill: 25–30% (Grid or Cubic recommended)

• Supports: ❌ Not needed

• Brim: Optional (recommended for small contact area)

• Nozzle Temp: 200–210 °C (PLA), 230 °C (PETG)

• Bed Temp: 60 °C (PLA), 70–80 °C (PETG)

• Cooling Fan: On

⸻

🧩 Assembly & Usage Instructions:

1. Print one unit (or more as needed).

2. Insert the printed lock into the center of the Hellbot spool to tighten the fit on the AMS or CFS roller.

3. Make sure the spool still rotates freely but without excess wobble.

4. Compatible with spools that have loose inner diameters (~52–58 mm ID).

⸻

📦 Notes:

• Designed for quick print and tool-free installation.

• Reusable and easy to remove.

• Works best with Hellbot-branded spools or similar geometry.

• Fits inside Bambu AMS and Creality CFS without interfering with the cover.

Spool Hellbot Recarga – Compatible Bambu AMS & Creality CFS

0.2mm layer, 2 walls, 7% infill