Recommended Printing Method:

Resin (SLA / MSLA) strongly recommended to capture:

Scale texture detail

Small spikes and bumps

Smooth transitions on the belly and face

FDM works well at medium–large scales (≥120 mm)

Scale Suggestions:

70–90 mm: tabletop or miniature creature

120–160 mm: display collectible

180 mm+: premium shelf statue

Supports:

Light supports under:

Chin and lower jaw

Belly area

Tail curve near the base

Spikes are thick enough to avoid fragile failures

Orientation:

Upright, flat base on build plate

Slight backward tilt (2–4°) improves chin and chest printing

Layer Height:

Resin: 0.03–0.05 mm

FDM: 0.16–0.2 mm

Material Recommendations:

Resin: ABS-like or Tough resin

FDM: PLA+, Matte PLA, or Silk PLA for stylized finish

Color & Finish Suggestions:

Body: olive green, moss green, forest green

Belly: sand, beige, light tan

Spikes: bone, ivory, light brown

Eyes: glossy brown or amber (clear resin + paint works great)

Print-Friendly Design Notes:

Rounded spikes (not needle-sharp)

Thick limbs and tail for durability

Integrated solid base for balance

No overhangs that require heavy supports

Excellent for beginner painters and sellers

Thornback Hatchling