Secure your towels, accessories, and more with this Benchy-themed wall hook!

Includes

1 custom Benchy, 1 Benchy wall mount, 1 chain, 2 chain connectors, hook

Print Settings I used:

Slicer Software: Creality Print

Printer: K1C printer

Filament: Hyper White PLA, Red PLA+, Black PLA+

Nozzle Temperature: 220°C

Layer Height: 0.2mm

Retraction Speed: 0.8mm

Retraction Speed: 30mm/s

Support: None

Adhesion: None

Infill: 20%

Note:

I exported the .gcode files as .txt files and manually added the "PAUSE" command in Notepad to the layers I wanted to switch filaments, then saved them as .gcode files again so that multiple colors may be switched throughout the print. I switched from black to red to black for the Benchy wall mount, you may change the color design for yourself! Application of glue or adhesion spray on the print bed is recommended in printing the chain!

Assembly

Carefully slide the custom Benchy onto the Benchy wall mount. Push the chain through the two holes on the custom Benchy, connect the head and tail of the chain with chain connectors to the hook. You're all set!

Benchy Wall Hook