Hueforge of a Coca-Cola advertising from 1912

The photos shows the result in 187*250mm and a nozzle of 0.4

The last photo compare

187*250mm and a nozzle of 0.4

and

150*200mm and a nozzle of 0.4

You can change the X and Y dimensions but do not change the Z dimensions

You must define the printing parameters indicated in the description below and change the filament on the indicated layers.

You can use filaments other than those indicated, but the result will differ.

You can use any black, white or red PLA

Hueforge description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 173.89x250mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.4mm and the Actual Depth is 1.4mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Jade White Transmission Distance: 5

PLA BambuLab Basic Red Transmission Distance: 4

This print uses 3 unique filaments

Swap Instructions:

Start with Black

At layer #6 (0.56mm) swap to Jade White

At layer #13 (1.12mm) swap to Red for the rest.

Coca cola Vintage advertising 1