Stargate 40cm (with inner trim remix) where the inner ring can manually be rotated. This one has different components for the chevron than my 80cm project. I had to use most of the original chevron print pieces from the original Stargate project instead of the remixed versions as the smaller dowels would have been way too small to be useful with this reduced size stargate. It does require a little more support cleanup because of that.

I am releasing the build plates that I used to print this amazing Stargate on my Hi printer as well as the modification of one piece of the inner part of the circle trim so that it doesn't require any glue. The main stargate was designed by Martin on the 'P r i n t a b l e s' site 'Stargate with Iris 80cm in diameter' and I also combined it with the hollow light pieces from the modified chevrons of the 'Stargate modified Chevron parts created by 'Spradlinb' on 'P r i n t a b l e s'. With Spradlinb's version of the top gold part of the chevron, It needs some thin double stick tape to make it stay on as it isn't solid like the original.

The Hi profile is designed for multi color CFS and set to a color scheme that I liked (gold and black). You can of course change that in the slicer. Most objects are single color but there are a few that need a few color changes done. The number of times you need to print a plate is in the plate name in the print profile.

I laid out pieces and adjusted tolerances on the pieces to print with better fitment when printing using the Hi printer. The tolerances need to be pretty good for the pieces to stay together. I would recommend printing one of each item first to test fitment before printing the entire thing. I expanded the holes on some parts by 0.1 in the slicer and also reduced the size of the dowels to fit better.

Besides changing tolerance of pieces for the Hi printer, The only real modification I made was to split the last inner trim piece into 2 pieces so that they can go on without needing any glue. I have included those as standalone .stl files. For the trim, put all 11 long pieces on (make sure to tap them with a block of wood to make them tight against each other) and for the final piece (Plate 08 'Center trim last one'), Put the longer piece on first and then the smaller section will push on.

Make sure to visit the original creators of this amazing piece and like their models. They really did a phenomenal job on these. They have way more details and even a video on how to put it together. I did not include the iris in my project as I didn't print that. You can get those from the original author's object page.

I am only including the .3mf Hi print profile (that has everything needed including my remix). If you just want the modified trim pieces, you can get them from .3mf project file or as original size STL files from my 80 cm project that I also published.

If you just want the reduced size STL files, just get them from the .3mf project file or instead visit the original creator of this awesome stargate and just reduce them by 50% to give his project some traffic. You can then use the modified trim pieces that I created with them if you want to create your own project from scratch.

Stargate 40cm (with inner trim remix)

0.2mm layer, 2 walls, 12% infill

原创模型