This is a decorative wall hand pot with a vase. Just need 2 bolts, 3 strings, 1 nut and the 3D printed parts to make this wonderfull wall pot. Bolt and nut diameter that I used : 5mm String diameter : max = 8mm

IF YOU WANT TO SELL THEM LEGALLY COMMERCIALLY, YOU NEED TO BE A MEMBER OF 3DPrintedInSpain Patreon.

⬇️⬇️⬇️

https://www.patreon.com/3DPrintedInSpain

My printing configurations: -Slicing Software used : Ultimaker Cura -Print parameters: Hand: 83.46mm*56.67mm*105.33mm Vase: 130.00mm*129.00mm*98.00mm Wall mount: 19.70mm*44.51mm*34.80mm -Printer : CR-10 Smart with Sonic Pad -Filament : PLA -Infill : 20% -Retraction : 40mm/s -Nozzle Temp : 220ºC -Supports : Used Tree supports for Hand & Vase