Hi ! My print of "Falor - Greater Demon - PRESUPPORTED - 32mm Scale" by "Printed Obsession" Printer: "Halot-Mage Pro" Files "stl-falor-body.stl", "stl-falor-wing-left.stl", "stl-falor-wing-right.stl" ( Presupported version ) Scale: 100% Sliced with: Halot Box (v4.4.0.3575 win64) Layer height: 0.05 mm without anti aliasing Resin used: Creality Water Washable Resin Plus White Exposure time of normal layers: 2.2s ( printing environment temperature: ~14°C ) After a quick soak in a "dirty" 99.9% isopropyl alcohol tank, removal of most of the printing supports, cleaning again but this time in a "clean" 99.9% isopropyl alcohol tank, a drying time, a UV treatment (~2 minutes), removal of last pieces of printing supports and assembly/gluing. I needed to work/file the sockets for the wings, there was a bit of play/space missing to allow the sockets to fit. Posted as an entry for "Introducing the Exciting November 3D Printing Event!" https://www.crealitycloud.com/post-detail/6540a6fc42c4bce0a33bd62c "November 3D Printing Event" https://www.crealitycloud.com/contest/november-3d-printing-event Good continuation to all !