Hi ! My print of "Mermaids" by "The Dragons Den" Printer: "Ender-3 V3 SE" (nozzel diameter: 0.4 mm) For all files Scale: 80% Sliced with: Creality Print v4.3.7 (Material "CR-PLA" (Head 205°C, plate 60°C), Parameter config "Normal") (Quality ->) Layer height: 0.2 mm, Initial Layer Height: 0.2 mm. (Shell ->) Z Seam Alignment: User Specified, Z Seam Position: Back Left, Z Seam X: 0.00 mm, Z Seam Y: 110.00 mm. (Infill ->) Infill Density: 10 % (Build Plate Adhesion ->) Build Plate Adhesion Type: autobrim File "MermaidLongHair.stl" Filament used: PLA Silk Vert ArianePlast Printing time: ~ 1h47 File "MermaidTailThatStands.stl" Filament used: PLA Silk Vert ArianePlast Printing time: ~ 1h39 File "MermaidWallStand.stl" Filament used: PLA Bleu Métallisé ArianePlast Printing time: ~ 3h02 Post-print processing sanding/scraping the printing defects, deburring. I still have to do a quick blast with a heat gun to remove the last angel hairs, Posted as an entry for "Introducing the Exciting November 3D Printing Event!" https://www.crealitycloud.com/post-detail/6540a6fc42c4bce0a33bd62c "November 3D Printing Event" https://www.crealitycloud.com/contest/november-3d-printing-event Good continuation to all !