-K1C printer -Used a 0.6mm nozzle with .016 first layer, and .2 layer for the rest. -Only used 2 walls because I bumped up the line width to 0.7mm. -Used 3 top shell layers and 4 bottom shell layers. -Infill at 13% with gyroid pattern. -60 mm/s first layer -100 mm/s inner/outer wall -no support -3hr & 34min print time -Used Creality print 5.0 -Had to edit the extruder size to 0.6mm in the printer setup. Everything is water proof and fits together well. Just started playing with the 0.6mm nozzle so there could always be more tuning/gains in efficiently.